General specifications
| Internal processing |
32bit (Accumulator=58bit) |
| Sampling frequency |
Internal | 44.1kHz, 48kHz, 88.2kHz, 96kHz |
| External |
Normal rate
44.1kHz(-10%) - 48kHz(+6%)
Double rate
88.2kHz(-10%) - 96kHz(+6%) |
Total harmonic distortion *
Input gain=Min. |
CH INPUT to OMNI OUT
Less than 0.05%, 20Hz to 20kHz @+4dB into 600Ω
Less than 0.01%, 1kHz @+18dB into 600Ω
(@Sampling frequency=44.1/48kHz)
Less than 0.05%, 20Hz to 40kHz @+14dB into 600Ω
Less than 0.01%, 1kHz @+18dB into 600Ω
(@Sampling frequency=88.2/96kHz) |
| Frequency response |
CH INPUT to OMNI OUT
0.5, -1.5dB 20Hz - 20kHz @+4dB into 600Ω
(@Sampling frequency=44.1/48kHz)
0.5, -1.5dB 20Hz - 40kHz @+4dB into 600Ω
(@Sampling frequency=88.2/96kHz) |
Dynamic range
(maximum level to noise level) |
110dB typ, DA Converter (OMNI OUT)
106dB typ, AD+DA (to OMNI OUT) |
Hum & noise level **
(20Hz-20kHz)
Rs=150Ω
Input Gain=Max
Input Pad=0dB
Input Sensitivity=-60dB |
-128dB Equivalent Input Noise
-86dB residual output noise, OMNI OUT STEREO OUT off
-86dB(90dB S/N), OMNI OUT STEREO fader at nominal level and all CH INPUT faders
-64dB(68dB S/N), OMNI OUT Master fader at nominal level and one CH INPUT fader |
Crosstalk(@1kHz)
Input Gain=Min |
80dB adjacent input channels (CH1-16)
80dB input to output |
* Total Harmonic Distortion are measured with a 6dB/octave filter @80kHz
** Hum&Noise are measured with 6dB/octave filter @12.7kHz;equivalent to a 20kHz filter with infinite dB/octave attenuation.
| Power requirements |
Japan: | AC100V 50/60Hz, 135W |
| North America: | AC120V, 60Hz, 135W |
| Other Areas: | AC220-240V, 50/60Hz, 135W |
Dimensions
W x H x D |
DM1000: 436 x 200 x 585 mm (17.1" x 7.8" x 23.0")
With MB and SP: 486 x 295 x 635 mm (19.1" x 11.6" x 25.0") |
| Weight |
20.0kg (75lbs) |
Analog input characteristics
| Input terminal |
PAD |
GAIN |
Actual load impedance |
For use with nominal |
Input level |
Connector |
| Sensitivity |
Nominal |
Max. before clip |
CH INPUT
1-16 |
0 |
-60dB |
3kΩ |
50-600Ω Mics & 600Ω Lines |
-70dB |
-60dB |
-40dB |
XLR3-31 type (Balanced) |
| -16dB |
-26dB |
-16dB |
+4dB |
| 20 |
-6dB |
+4dB |
+24dB |
| OMNI IN 1-4 |
10kΩ |
600Ω Lines |
+4dB |
+4dB |
+24dB |
XLR3-31 type (Balanced) |
Analog output characteristics
| Output terminal |
Actual source impedance |
For use with nominal |
GAIN SW |
Output level |
Connector |
| Nominal |
Max. before clip |
| OMNI OUT 1-12 |
150Ω |
600kΩ Lines |
- |
+4dB |
+24dB |
XLR3-32 type (Balanced) |
| PHONES |
100Ω |
8Ω Lines |
- |
4mW |
25mW |
ST Phone jack (Unbalanced) |
| 40Ω Lines |
- |
12mW |
75mW |
Digital input characteristics
| Terminal |
Format |
Data length |
Level |
Connector |
| 2TR IN DIGITAL |
1 |
AES/EBU |
24bit |
RS422 |
XLR3-31 type (Balanced) |
| 2 |
IEC-60958 |
24bit |
0.5Vpp/75Ω |
RCA pin jack |
Digital output characteristics
| Terminal | Format | Data length | Level | Connector |
|---|
| 2TR OUT DIGITAL | 1 | AES/EBU
(Professional use) | 24bit | RS422 | XLR3-32 type (Balanced) |
| 2 | IEC-60958
(Consumer Use) | 24bit | 0.5Vpp/75Ω | RCA pin jack |
0dB=0.775Vrms; 0dBV=1.00Vrms