|
|
|
 |
| |
General specifications
| Internal processing |
32-bit (Accumulator 58-bit) |
| Sampling frequency rate |
Internal |
44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz |
| External |
Normal rate
44.1 kHz(-10%) to 48 kHz(+6%)
Double rate
88.2 kHz(-10%) to 96 kHz(+6%) |
| Fader |
25x 100mm motorized, touch sensitive fader |
Total harmonic distortion*
Input Gain=Min. |
Less than 0.05%, 20Hz to 20 kHz @+14dB into 600ohms
Less than 0.01%, 1kHz @+18dB into 600ohms
CH INPUT to STEREO OUT
(@Sampling frequency = 96 kHz) |
| Frequency response |
0.5, -1.5dB, 20Hz to 20 kHz @+4dB into 600ohms
(@Sampling frequency = 48 kHz)
0.5, -1.5dB, 20Hz to 40 kHz @+4dB into 600ohms
(@Sampling frequency = 96 kHz) |
Dynamic range
(maximum level to noise level) |
110dB typ. DA Converter (STEREO OUT)
105dB typ. AD+DA (to STEREO OUT) |
Hum & noise level **
(20Hz to 20kHz)
Rs=150ohms
Input Gain=Max
Input Pad=0dB
Input Sensitivity=-60dB |
-128dB Equivalent Input Noise.(20Hz to 20 kHz)
-92dB residual output noise. STEREO OUT
STEREO OUT off.
-92dB(98dB S/N) STEREO OUT,
STEREO fader at nominal level and all CH INPUT faders at minimum level.
-64dB(68dB S/N) STEREO OUT
STEREO fader at nominal level and one CH INPUT fader at nominal level |
Crosstalk(@1kHz)
Input Gain=Min |
70dB adjacent input channels (CH1 to 24)
70dB input to output |
| Power requirements |
Japan: |
AC100V 50/60Hz, 200W |
| North America: |
AC120V, 60Hz, 200W |
| Other Areas: |
AC220-240V, 50/60Hz, 200W |
| Power consumption |
190W (with MB02R96) |
| Dimensions |
02R96: 667 x 239 x 697 mm (26.3" x 9.4" x 27.4")
With MB and SP: 700 x 352 x 762 mm
|
| Weight |
34kg (75lbs) |
* Total Harmonic Distortion is measured with a 6dB/octave filter @80kHz
** Hum & Noise are measured with 6dB/octave filter @12.7 kHz ; equivalent to a 20 kHz filter with infinite dB/octave attenuation.
Library
Effect libraries
(EFFECT1-4) |
factory presets
user libraries |
52(EFFECT3-4 :44)
76 |
| Compressor libraries |
factory presets
user libraries |
36
92 |
| Gate libraries |
factory presets
user libraries |
4
124 |
| EQ libraries |
factory presets
user libraries |
40
160 |
| Channel libraries |
factory presets
user libraries |
2
127 |
| Surround Monitor libraries |
factory presets
user libraries |
1
32 |
| Input patch libraries |
factory presets
user libraries |
1
32 |
| Output patch libraries |
factory presets
user libraries |
1
32 |
| Bus to stereo libraries |
factory presets
user libraries |
1
32 |
Analog input characteristics
| Input terminal |
PAD |
GAIN |
Actual load impedance |
For use with nominal |
Input level |
Connector |
| Sensitivity |
Nominal |
Max. before clip |
CH INPUT
A/B 1-16 |
0 |
-60dB |
3kohms |
50-600ohms Mics & 600ohm Lines |
-70dB |
-60dB |
-46dB |
A:XLR3-31 type (Balanced)
B:TRS phone jack (Balanced) |
| -16dB |
-26dB |
-16dB |
-2dB |
| 26 |
0dB |
+10dB |
+24dB |
CH INPUT
17-24 |
-34dB |
4kohms |
600ohm Lines |
-44dB |
-34dB |
-20dB |
TRS phone jack (Balanced) |
| +10dB |
0dB |
+10dB |
+24dB |
| CH INSERT IN 1-16 |
10kohms |
600ohm Lines |
-6dB |
+4dB |
+18dB |
TRS phone jack (Balanced) |
| 2TR IN ANALOG1(L,R) |
10kohms |
600ohm Lines |
+4dB |
+4dB |
+18dB |
TRS phone jack (Balanced) |
| 2TR IN ANALOG2(L,R) |
10kohms |
600ohm Lines |
-10dBV |
-10dBV |
+4dBV |
RCA pin jack (Unbalanced) |
* 0dB=0.775 Vrms
* 0dBV=1.00 Vrms.
* +48V DC(phantom power) is supplied to CH INPUT(1-24) XLR type connector via each individual switch.
Analog output characteristics
| Output terminal |
Actual source impedance |
For use with nominal |
GAIN SW * |
Output level |
Connector |
| Nominal |
Max. before clip |
| STEREO OUT(L,R) |
600ohms |
10kohm Lines |
- |
-10dBV |
+4dBV |
RCA pin jack
(Unbalanced) |
| 150ohms |
600kohm Lines |
- |
+4dB |
+18dB |
XLR3-32 type
(Balanced) |
| STUDIO MONITOR OUT(L,R) |
150ohms |
10kohm Lines |
- |
+4dB |
+18dB |
TRS phone jack (Balanced) |
| C-R MONITOR OUT(L,R) |
150ohms |
600kohm Lines |
- |
+4dB |
+18dB |
TRS phone jack (Balanced) |
| OMNI OUT 1-8 |
150ohms |
10kohm Lines |
+18dB
(default) |
+4dB |
+18dB |
TRS phone jack (Balanced) |
| +4dBV |
-10dBV |
+4dBV |
| INSERT OUT 1-16 |
600ohms |
10kohm Lines |
- |
+4dB |
+18dB |
Phone jack
(Unbalanced) |
| PHONES |
100ohms |
8ohm Lines |
- |
4mW |
25mW |
ST phone jack (Unbalanced) |
| 40ohm Lines |
- |
12mW |
75mW |
* +18dB, +4dBV selectable (Internal SW)
0dBV=.00 Vrms.
0dB=0.775 Vrms.
Digital input characteristics
| Terminal |
Format |
Data length |
Level |
Connector |
| 2TR IN DIGITAL |
1 |
AES/EBU |
24bit |
RS422 |
XLR3-31 type (Balanced) |
| 2 |
IEC-60958 |
24bit |
0.5Vpp/75ohms |
RCA pin jack |
| 3 |
IEC-60958 |
24bit |
0.5Vpp/75ohms |
RCA pin jack |
| CASCADE IN |
- |
- |
RS422 |
D-sub Half Pitch Connector 68P (female) |
Digital output characteristics
| Terminal |
Format |
Data length |
Level |
Connector |
| 2TR OUT DIGITAL |
1 |
AES/EBU
(Professional use) |
24bit |
RS422 |
XLR3-31 type (Balanced) |
| 2 |
IEC-60958
(Consumer Use) |
24bit |
0.5Vpp/75ohms |
RCA pin jack |
| 3 |
IEC-60958
(Consumer Use) |
24bit |
0.5Vpp/75ohms |
RCA pin jack |
| CASCADE OUT |
- |
- |
RS422 |
D-sub Half Pitch Connector 68P (female) |
|
|
|