|
1.Download the latest drivers with the Download Wizard in the driver menu of the website www.mlancentral.com
2.Disconnect the i88x of the computer or power it off before starting the installation
3.Go to the control panel and open the system menu. Choose “Hardware“, then „driver signing“. Choose “ignore“in the upcoming window. This blocks the operating system to ask for approval and speeds up the installation
4.Open the downloaded driver folder. You will find an installation guide in the subfolder “for_i88x_user“. The driver can be found in the “mLAN_“ –subfolder. Please open this folder and double click on “Setup“ to start the installation
5.Confirm the upcoming windows by clicking on “OK“ or “Next “. A few installation windows will come up. Please ensure that the installation is complete and no window is left out, and then click on “finish”. Now the computer will be restarted.
6.Connect the i88x to the computer after the restart. Activate the mLAN driver by clicking on the blue mLAN Manager icon in the taskbar with the right mouse button and then clicking on “On“with the left mouse button. Now additional i88x drivers will be installed. Again confirm the upcoming windows by clicking on “next“ and then “finish”.
7.Click on “OK“ at the end and choose the “Auto Connector“ in the mLAN Manager menu. In the Auto Connector you can set the Sample rate and the number of inputs and outputs according to your needs. If you want to hear the Windows sounds via the analogue or digital outputs, you have to click on the ASIO/WDM field. The ASIO drivers are needed for professional programs like Cubase or Logic. In the mLAN manager menu „Driver Setup“ you can increase/decrease the buffer size, to get the best performance for your system.
8.Click on „Connect“ to set up the connection to the i88x and start your audio recording program.
In Cubase/Nuendo the drivers are set in the „VST Multitrack“ menu of the device setup. Choose "mLAN ASIO“ as ASIO driver.
In Logic the drivers are set in the Audio >> Audio Hardware & Drivers menu. On the file card „Audio Driver 2“you have to choose ASIO and then “ASIO Driver for mLAN“. Then restart Logic.
9.There should be a signal on the Master Outs 1/2 when starting playback in the audio software, as soon as the master volume of the i88x is turned up. It is also possible to choose other outputs in your audio software.
10.When playing an instrument on input 1 you can hear the signal directly with the monitoring option of the i88x. Choose the input with the monitor select button (in this case 1) that you want to hear, then turn up the monitor volume. Normally the input 1 of the i88x goes also directly to input 1 of your recording software, so you can record your signal.
|